One Time Molding 5mm 6mm Compact Busbar Bending Machine

One Time Molding 5mm 6mm Compact Busbar Bending Machine

Features

Power consumption is only: 10W, rated output force: 120KN, good stability, the output force change is only ±20Kg force within the 20mm boost stroke range, the equipment has high working efficiency, five to ten faster than ordinary hydraulic presses Times. Take the configuration of this model as an example, it can complete about forty cycles per minute. And the speed can be easily adjusted, the pressure can be easily adjusted, there is no requirement for the height of the mold, at any position, at any position during the pressing process, the workpiece is sensed and the pressure is started, and because of the unique soft in place, the workpiece Without any damage to the mold, it is immediately converted into a stable output of static pressure.

There are many types of equipment control systems, which are adapted to the needs of different users. They can have relay control circuits, PLC control circuits, and single-chip control circuits, which can realize man-machine dialogue, easy operation, and good safety performance. They are equipped with two-hand control methods. Infrared light curtain protection can be added to make the safety performance better.

Introduction

Digital bus bar punching machine is used to punch the two ends of busbar in one time to guarantee parallelism between busbar profile and conductor. This parallelism ensures the reliable connection between conductor and joint which can control joint temperature rising. Key point is that machine can adjust the rebound coefficient according to conductor’s material and width. Rebound coefficient varies by bending or different conductor width and this kind of adjustment can guarantee the parallelism.

Equipment data on digital copper bar punching machine

5mm Busbar Bending Machine

6mm Busbar Bending Machine

10mm Busbar Bending Machine

One Time Molding 5mm 6mm Compact Busbar Bending Machine Images